Installation Guide
This guide explains how to install the Process Vision application.
System Requirements
Software Requirements
| Item | Minimum |
|---|---|
| Operating System | Windows 10 (64-bit) or later |
| .NET Runtime | .NET 8 Desktop Runtime |
| Screen Resolution | 1280 x 720 or higher (1920 x 1080 recommended) |
Hardware Requirements
| Item | Description |
|---|---|
| COM Port | At least one RS-232/RS-485 serial port (for Modbus controllers) |
| Capture Card | AVerMedia GC570 or compatible USB capture device (optional, for video recording) |
| Memory | 4 GB or more recommended |
| Disk Space | ~200 MB for the application; additional space for data and recordings |
Installation Steps
-
Obtain the installer: Get the Process Vision installer (
.exe) from your system administrator. -
Run the installer: Double-click the installer and follow the setup wizard.
-
Install .NET Runtime: If the .NET 8 Desktop Runtime is not already installed, the installer will prompt you to download and install it.
-
Installation complete: After installation, a Process Vision shortcut will appear on your desktop.
Hardware Connections
Controller Connections
- Connect the TAIE FC series controllers to the computer's COM ports using RS-232 or RS-485 cables.
- Verify the temperature controller is connected to the designated COM port (default: COM1, Slave Address 1).
- Verify the pressure controller is connected to the designated COM port (default: COM2, Slave Address 2).
Capture Card Installation
- Plug the AVerMedia GC570 capture card into a USB port on the computer.
- Install the capture card drivers (follow the manufacturer's instructions).
- Verify the device appears in Windows Device Manager.
Automatic Updates
Process Vision supports automatic updates. When a new version is available, the system will prompt you at startup. Follow the on-screen instructions to complete the update.
Uninstallation
Go to Windows "Settings > Apps", find Process Vision, and click "Uninstall" to remove the application.